Can I Use R22 In A R410a System
Can i use r22 in a r410a system. Though these two refrigerants need different pressure they both use incrementally similar pressure ratios. No you cannot. There is no way you can do it.
Mixing R22 and R410a. They are both good refrigerants and they both work but they have to be charged in the system at different pressures. Can I use an R410A condenser with an R22 air handler.
You should never ever try to mix them in the same system or use them in a system not rated specifically for that kind of refrigerant. R410A is a higher pressure system and R22 is a lower pressure system. To me replacing R22 with R32 seems to be a recipe for disaster.
There is more than enough eviden. What this means is that a system designed to use R-22 will fail quickly if filled with R-410A and vice versa. Your existing condensing unit and cooling coil are not suited to the new higher pressure refrigerant.
He said you can mix up to 20 as long as you keep the pressures in line. Comments that are degrading or foul language will be deleted. To make a short story long R410A and R22 are refrigerants.
R410A is a higher pressure system and R22 is a lower pressure system. To make a short story long R410A and R22 are refrigerants. It is possible to reuse the copper tubing lineset between the two but we will discuss that later.
If thats so then what R22 there is in the system can never evaporate under the higher suction pressure of R410a. Can a r22 coil be used with 410a.
To make a short story long R410A and R22 are refrigerants.
Mixing R22 and R410a. They are both good refrigerants and they both work but they have to be charged in the system at different pressures. All the tubing will be lined with the old oil and flushing would be problematic. To me replacing R22 with R32 seems to be a recipe for disaster. Mor specifically they work off of a balanced ratio of vapor and liquid pressures. If you have an air conditioner that uses R-22 refrigerant you will no longer be able to refill the refrigerant if a leak occurs. I had a tech come and service my AC the other day and he put R410 refrigerant in in my R22 system. The oil has to be replaced if you do not want sludge forming in the system. Your existing condensing unit and cooling coil are not suited to the new higher pressure refrigerant.
R22 refrigerant and its HFC replacement R410A are totally incompatible. Your existing condensing unit and cooling coil are not suited to the new higher pressure refrigerant. To make a short story long R410A and R22 are refrigerants. If R-410a is added by mistake to an R-22 system ALL effects are detrimental to the performance of the system designed for R-22 In residential cooling R-410a operates at - 400 psig condensing while R-22 is 225 psig. Replacing the condenser compressor evaporator and refrigerant lines. R410A is a higher pressure system and R22 is a lower pressure system. In our opinion it used to be cheaper to simply change out your old R22 system with a new R-22 system but not anymore.
Post a Comment for "Can I Use R22 In A R410a System"